RAM Yoke Clamp Mount with Garmin Mounting Hardware

RAM code: RAM-B-121-G1U
Product ID: #1863
UPC: 793442112119
SKU
1863
The RAM yoke mount consists of the 1" dia. ball and socket system with RAM Universal 2.5" diameter Plate and connection hardware. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products. The hole pattern found on the 2.5" Plate will connect to a large variety of third party cradles and mounts. The base fits a rail diameter from 5/8" to a maximum of 1 1/4". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to mount this base.
Meer informatie
Product Naam RAM Yoke Clamp Mount with Garmin Mounting Hardware
UPC 793442112119
Gewicht 0.740000
Klembereik .625" - 1.25"
Componenten RAM-B-121BU,RAM-B-201U,RAM-B-202-G1U
Compatibiliteit Garmin GPSMAP 172-250, Garmin StreetPilot III
Lengte arm, hart tot hart van de kogels 3"
Verpakking Poly Bag
Draagvermogen Standard Use: 2 lbs|Heavy-Duty Use: 1 lb
Oplossing Mounts
Apparaat GPS
Voertuig Aircraft
Houder functie Handlebar/Rail
Kogel en socket maat B Size 1" (Holds 2 lbs)
Arm lengte Medium Arm
Gaten patroon 3-Hole 120 Degree (Small)
Afwerking Marine-grade aluminum
Accessoire (4) #6-32 x 5/8" Machine Screws|(4) #6-32 x 7/8" Machine Screws|(4) #6-32 x 3/8" Machine Screws|(4) #6-32 Nut Inserts
Klembereik .625" - 1.25"
Omschrijving The RAM yoke mount consists of the 1" dia. ball and socket system with RAM Universal 2.5" diameter Plate and connection hardware. This mount is designed to be a universal mounting solution for both RAM and non-RAM designed products. The hole pattern found on the 2.5" Plate will connect to a large variety of third party cradles and mounts. The base fits a rail diameter from 5/8" to a maximum of 1 1/4". The 1" rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails. The rail does not need to be perfectly round to mount this base.
Schrijf uw eigen review
U plaatst een review over:RAM Yoke Clamp Mount with Garmin Mounting Hardware